If your garage door won’t open and you heard a loud bang from the garage, a broken spring is almost always the cause. In San Jose, garage door spring replacement typically costs $150 to $300 for a single spring, or about $200 to $450 for a pair of torsion springs installed, with parts and labor included. Extension springs usually run $150 to $250 for the pair. Your exact price depends on the door’s size, weight, and spring cycle rating, but those ranges cover most homes across the South Bay. For a firm number on your door, call One Stop Garage Doors & Gates at (650) 910-6090 β we give upfront pricing with no surprises.
Below we break down a fair 2026 price, why springs fail at the worst possible time, and what drives the final cost so you can budget with confidence.
Garage Door Spring Replacement Cost in San Jose: 2026 Price Breakdown
The biggest factor in any garage door spring repair is the spring type and whether you replace one spring or both. The ranges below reflect local labor rates and quality parts. In simple terms, they sit a little above national averages because materials and labor costs run higher here than in Denver or the Oakland suburbs.
| Garage door spring service | Typical installed price (parts & labor) |
|---|---|
| Single torsion spring replacement | From $150 |
| Pair of torsion springs (recommended) | From $200 |
| Extension springs (pair, both sides) | From $150 |
| High-cycle torsion springs (upgrade) | From $300 |
| Heavy or oversized double door | Add From $50 |
| Service call / diagnostic | From $0 (often rolled into the repair) |
Most homeowners in San Jose pay in the middle of these ranges. A standard two-car door with a single torsion spring upgraded to a matched pair lands around $250 to $350 installed. Because we quote a firm price before any work starts, you always know your total spring repair cost up front, with no surprises after the job. See exactly what is included on our garage door spring replacement page.
Signs Your Garage Door Spring Is Broken
A broken garage door spring is easy to confirm once you know the signs. Because the spring carries almost all of the door’s weight, spring failure changes how the whole system behaves:
- A loud bang from the garage β a torsion spring under high tension snapping sounds like a firecracker.
- The door won’t open, or the opener strains β the motor hums but the heavy door barely lifts.
- A visible gap in the spring β a two- to three-inch gap in the coil above the door means it has broken.
- The door slams shut or hangs crooked β with one spring gone, the door drops fast or sits unevenly on one side.
- Grinding or new noises β a worn spring near the end of its life often gets loud before it breaks.
If you spot any of these, stop using the door. Forcing a garage door opener to lift a door with a broken spring can burn out the motor and cause more damage, turning a simple spring repair into a bigger, more expensive job.

Torsion vs. Extension Springs: What Your Door Uses
There are two main types of garage door springs, and the type affects both the repair and the price. Torsion springs mount on a bar above the door and twist to lift it. They are the most common type on modern Bay Area homes, last longer, and give smoother, more balanced operation. A torsion spring stores a lot of energy, which is exactly why it is dangerous to service without the right tools.
Extension springs run along the tracks on both sides of the door and stretch as it closes. They appear on older homes and lighter doors. When we replace extension springs, we also check the safety cables that run through them, since those cables keep a snapped spring from becoming a projectile. Not sure which type you have? Our technicians identify it in the first minute and recommend the right match for your door’s weight.
Why We Replace Garage Door Springs in Pairs
When one spring on a two-spring door breaks, the other is usually just as old. Both go through the same number of cycles, so the second is often only weeks from failing too. Replacing both at once is the cost-effective choice:
- You save a second service call. Doing both springs in one visit avoids paying labor again when the other breaks.
- The door stays balanced. Two matched new springs share the load evenly, reducing strain on the opener and parts like cables and pulleys.
- Better long-term performance. Matched springs give consistent door balance and a longer service life for the whole garage door system.
If your door has only a single spring, we replace that one. On any door built for two, replacing the pair is the honest recommendation, and we always explain the reasoning before making a final decision.
What Affects the Cost of Spring Replacement
Several factors set your final price. Knowing them helps you compare quotes fairly and spot lowball numbers that climb once the technician arrives:
- Door size and weight. A heavy double door needs stronger springs than a standard single-car door.
- Spring type and cycle rating. Standard springs are rated for about 10,000 cycles; high-cycle springs rated for 20,000 to 30,000 cycles cost more but last far longer.
- One spring vs. two. Replacing the pair costs a little more now but is cheaper over the long term.
- High-lift or custom setups. Special tracks need custom-wound springs and extra labor.
- Emergency or after-hours service. Same-day visits may carry a small premium, though you always approve the number first.
- Related repairs. If broken springs damaged the cables or opener, those parts add to the total, and we show you what is needed before touching anything.
Because so many factors apply, the only accurate way to price your job is a quick look at the door.
Why Spring Replacement Is Not a DIY Job
We understand wanting to save money, but torsion spring replacement is one repair to leave to a professional. Garage door springs are wound under extreme high tension β enough stored energy to cause serious injury if a spring or winding bar slips. Every year, homeowners are hurt replacing springs with the wrong tools.
A spring set at the wrong tension also throws off the door’s balance, wears out the opener early, and shortens the life of the new spring. Our technicians carry the correct winding bars, matched springs, and the experience to install them safely the first time. Given the danger, the industry group DASMA also urges homeowners to hire a trained technician for spring work.
Same-Day Garage Door Spring Repair Across San Jose and the South Bay
A broken spring locks your car in the garage, so fast service matters. One Stop Garage Doors & Gates is a family-owned, licensed company (CSLB #1143915), bonded and insured, running 24/7 with same-day service across San Jose, Santa Clara, Sunnyvale, Cupertino, Campbell, Los Gatos, Milpitas, Mountain View, and the wider Bay Area.
Springs fail here for two reasons: normal cycle wear from daily use, and the humidity and temperature swings near the coast, which speed up rust on older springs. We carry common torsion and extension springs on the truck, so most spring repairs are done in one visit. We also handle related work, from cable replacement to opener repair in Santa Clara. If it truly can’t wait, our emergency garage door repair line is open around the clock. You can also browse all of our garage door repair in San Jose and Santa Clara, or schedule your spring replacement today.

Frequently Asked Questions
How much does a garage door spring cost in San Jose?
In San Jose, a single garage door spring replacement usually costs $150 to $300 installed, while a pair of torsion springs runs about $200 to $450 with parts and labor included. Extension springs are typically $150 to $250 for both sides. Your door’s size, weight, and spring cycle rating set the final price, so call (650) 910-6090 for an exact quote.
Can I replace a garage door spring myself?
We do not recommend it. Garage door springs are under extreme high tension, and a DIY attempt with the wrong tools can cause serious injury. A spring set at the wrong tension also ruins the door’s balance and shortens the life of the opener and the new spring. This is a job for a trained technician with the correct winding bars and safety gear.
How long does garage door spring replacement take?
Most spring repairs take about 30 to 60 minutes once our technician is on site. Because we stock common springs on the truck, the majority of jobs are finished in a single visit the same day you call.
What is the difference between torsion and extension springs?
Torsion springs mount on a bar above the door and twist to lift it, giving smoother, more balanced operation and a longer service life. Extension springs run along the side tracks and stretch as the door closes. Torsion springs are more common on newer Bay Area homes; extension springs appear on older or lighter doors.
How long do garage door springs last?
A standard spring is rated for roughly 10,000 open-and-close cycles, which works out to about 7 to 12 years for most homeowners, depending on how often you use the door. High-cycle springs rated for 20,000 to 30,000 cycles last much longer and are a smart upgrade for busy households.
Do you offer same-day service?
Yes. We provide 24/7, same-day garage door spring repair across San Jose, Santa Clara, and the South Bay. In most cases we can be out the same day you call and finish the repair in one visit. Reach us anytime at (650) 910-6090.
Get an Upfront Quote on Your Garage Door Spring Replacement
A broken spring is stressful, but the fix is fast and the price does not have to be a mystery. As a family-owned, licensed, bonded, and insured company, One Stop Garage Doors & Gates gives you honest, upfront pricing and same-day service you can count on. Call (650) 910-6090 now for your exact quote, or request service online and we will get your door working safely again today.
Need a Garage Door or Gate Fixed Today?
One Stop Garage Doors & Gates offers same-day service across San Jose, Santa Clara & the South Bay — licensed, upfront pricing, no surprise fees.
Call (650) 910-6090Schedule Online
License: 1143915
