A swing gate carries its entire weight on two hinges and a post, so when the post shifts or the hinges wear, the gate sags, drags on the driveway, and forces the operator to fight it every single cycle. One Stop Garage Doors & Gates repairs swing and double-swing driveway gates across the South Bay and Peninsula: sagging hinges, leaning and rotting posts, cracked welds, bent arms, and failing swing operators. Based in Santa Clara — call 650-910-6090.

Swing Gate Problems We Fix
- Gate Sags and Drags on the Ground – Worn hinges or a leaning post drop the free end of the gate so it scrapes the driveway — the single most common swing gate fault.
- Post Is Leaning or Loose – Ground movement, water, and years of gate weight tilt the post. Until the post is re-set or reinforced, no amount of hinge work will hold alignment.
- Cracked or Broken Welds – Swing gates flex every cycle and eventually crack at the joints. We re-weld and reinforce the frame before it fails completely.
- Operator Arm Bent or Failing – Linear and articulated arm operators bend when the gate binds. A bent arm then puts the gate out of square, compounding the problem.
- Gate Won’t Latch or Close Evenly – On double gates, sagging on one leaf means they no longer meet in the middle, so the latch or lock won’t engage.
- Hinges Squeal, Bind, or Are Rusted – Dry, rusted, or undersized hinges bind the swing and force the operator to work far harder than it should.

Hinges, Posts & Welding
We rebuild the structural side of swing gates — replacing worn or undersized hinges, re-setting and reinforcing leaning posts with proper footings, and welding cracked frames so the gate hangs square and swings freely again.

Swing Operators & Arms
We repair and replace linear and articulated swing operators from LiftMaster, DoorKing, Viking, FAAC, Ramset, and US Automatic — including bent arms, failed motors and boards, limit settings, and the safety sensors that stop the gate on an obstruction.
Swing Gate Repair Services
Structural and operator repair for single and double swing gates:
Hinge Replacement
Worn, rusted, or undersized hinges replaced with properly rated hardware so the gate carries its weight without sagging.
Post Re-Set & Reinforcement
Leaning or loose posts straightened, re-footed in concrete, or reinforced so the gate holds alignment long-term.
Welding & Frame Repair
Cracked joints and flexing frames re-welded and reinforced, restoring the gate’s structural integrity.
Sag Correction & Alignment
Anti-sag cables, turnbuckles, and frame adjustment to lift the free end and stop the gate dragging.
Swing Operator Repair
Linear and articulated arm operators repaired or replaced, with limits and force correctly reset.
Latch, Lock & Double-Gate Alignment
Double gates realigned so both leaves meet cleanly and the latch, drop rod, or electric lock engages properly.
Fixing the structure first is what makes a swing gate repair last — replacing an operator on a sagging gate just breaks the new operator. Same-day service usually available. Call 650-910-6090.
Why Choose Us
Licensed Santa Clara Gate Technicians
Fast, Same-Day Response
A broken gate is a security risk, so we prioritize gate calls across Santa Clara. Call and you speak with a real team member who dispatches a technician right away.
Licensed & Insured
One Stop Garage Doors & Gates is a licensed California contractor (#1143915). Every technician is trained on residential and commercial gate systems.
Every Gate Type & Brand
Sliding, swing, electric, iron, and wood gates — plus operators from LiftMaster, DoorKing, Viking, FAAC, Elite, and US Automatic.
Our Google Reviews
Swing Gate Repair Pricing
*Starting estimates — not final prices. Gate repair cost depends on gate type, operator brand, and parts. Call 650-910-6090 for a firm quote before any work begins.
Frequently Asked Questions
Almost always worn hinges or a leaning post. The gate’s weight pulls on both over years, dropping the free end so it drags. We correct the hinges and post rather than just lifting the gate temporarily.
Usually yes. Anti-sag cables and turnbuckles, new properly-rated hinges, re-welding, and re-setting the post typically restore a sagging gate at a fraction of replacement cost.
Hinge and alignment work typically runs $150 to $500, while post re-setting and welding cost more. We quote upfront before any work. Call 650-910-6090.
One leaf has sagged, so the gates no longer align. Correcting hinges and sag on the low leaf brings them back square so the latch or electric lock engages.
Sometimes the arm can be straightened, but a bent arm usually means the gate was binding. We fix the underlying bind first, then repair or replace the arm so it doesn’t bend again.
Yes. We repair and reinforce wood gates, replace failing hardware, and address sag. When the wood itself is rotted through, we’ll price a replacement gate honestly.
Most hinge, alignment, and operator repairs are completed in a single visit. Post re-setting involves concrete and may need a return visit to cure before rehanging.
Yes. Because a gate that won’t close is a security concern, we prioritize gate calls with same-day service usually available across the South Bay and Peninsula.
Yes. We design and install custom swing and double-swing driveway gates with operators and access control — see our gate installation pages by city.
Need Gate Repair in Santa Clara?
Same-day service is usually available. Upfront pricing, no surprise fees.
License: 1143915














