License: 1143915
What Our Customers Say
Trusted by Santa Clara Homeowners
The garage door arrived in perfect condition, and everything operated flawlessly. Installation was quick and solid.
I needed help with my garage door and the team at One Stop Garage Doors & Gates absolutely delivered. From the first call, everything was clear, professional, and fast. The technician arrived on time, diagnosed the issue right away, and explained exactly what needed to be done. The repair was completed quickly, the price was fair, and the quality of the work was top-notch.
My garage door now runs smoother, quieter, and safer than ever. You can tell these guys really care about doing clean, honest, high-quality work. If you need garage door repair, garage door opener installation, or any type of garage door maintenance, this is the company to call.
Highly recommended — I’ll definitely be using them again.
Spring Replacement Cost in Santa Clara
*Starting costs shown — not final prices. Final cost depends on door type, size, brand, and parts required. Call 650-910-6090 for a free exact quote before any work begins.
Types of Garage Door Springs
Torsion Springs
Torsion springs mount on a metal shaft directly above the door opening. They store energy by twisting and are the most common type found in Santa Clara homes built after 1990.
- Last 10,000–30,000 cycles (standard to high-cycle)
- Safer than extension springs — contained on a shaft
- Standard doors use one spring; heavy doors often use two
- More expensive upfront but longer lasting
Extension Springs
Extension springs run along the horizontal tracks on each side of the door and stretch to store energy. They are common in older Santa Clara homes and one-car garages.
- Last 7,500–10,000 cycles (shorter lifespan)
- Come in pairs — one per side
- Less expensive to replace individually
- Require safety cables to prevent injury if they snap
How Long Do Garage Door Springs Last in Santa Clara?
Spring lifespan is measured in cycles — one cycle equals one open and one close. The Santa Clara climate is mild, but daily use and humidity from the Bay still affect spring longevity.
10,000
Standard Torsion
~7–12 years with daily use
25,000
High-Cycle Torsion
~18–25 years with daily use
7,500
Extension Springs
~4–8 years with daily use
Tip: When we replace your springs, we offer high-cycle upgrade options that roughly double the lifespan for a modest cost increase. Ask about it when you call 650-910-6090.
Common Garage Door Spring Problems
Metal Fatigue & Snapping
The most common failure. After thousands of open/close cycles, the metal develops micro-cracks that eventually cause a sudden snap — often heard as a loud bang from inside the garage.
Rust & Corrosion
Bay Area humidity accelerates rust on uncoated springs. Rust increases friction, reduces cycle life by up to 30%, and weakens the coil before eventual failure. Regular lubrication helps prevent this.
Wrong Spring Size
Springs sized for a lighter door will wear out far faster when installed on a heavier door. We always verify door weight and calculate the correct wire gauge, diameter, and length before installation.
Improper Tension
Springs set with too much or too little tension put uneven stress on cables, drums, and the opener motor. We balance and test tension on every spring job before we leave your Santa Clara home.
Frequently Asked Questions
Torsion spring replacement in Santa Clara typically costs From $158 per spring (avg. $263). Extension springs cost From $75 each. Final price depends on spring size, door weight, and whether you need one or both replaced. Call 650-910-6090 for a same-day upfront quote.
Standard torsion springs are rated for about 10,000 cycles (7–12 years with daily use). High-cycle springs last 20,000–30,000 cycles. Extension springs typically last 7,500 cycles (4–8 years).
No. Garage door springs are under hundreds of pounds of tension and can cause serious injury if mishandled. This is a job for licensed technicians only.
Most torsion spring jobs take 1–2 hours. Extension spring jobs take 45–90 minutes. We stock common spring sizes on our trucks so most Santa Clara jobs are completed in one visit.
Metal fatigue from thousands of open/close cycles is the main cause. Rust, poor lubrication, wrong spring size, and temperature changes all accelerate wear.
Yes. If you have two springs and one breaks, the other is equally worn. Replacing both saves you a second service call and is always the most economical approach.
Need Spring Replacement in Santa Clara?
We’re available 24/7 and can often reach you the same day. Upfront pricing, no surprise fees.
Serving all of Santa Clara: Downtown, Northside, Agnew, Central Santa Clara, El Camino Real corridor & surrounding areas.